The Model 1200B series is a computerized hand-held potentiostat/bipotentiostat. The instrument consists of a digital function generator, a data acquisition system, and a potentiostat/bipotentiostat. The potential range is ±2.4 V, and the current range is ±2 mA. This series is capable of measuring current down to 100 pA. The steady state current of a 10 μm disk electrode can be readily measured. The size of the instrument is 7” (L) x 4.5” (W) x 1” (H). The instrument is powered through the USB data port, without the need for an AC adapter or batteries. This compact and convenient instrument can be used for electroanalysis and sensor studies. Due to its small size, light weight, and low cost, it is particularly useful for field applications and teaching laboratories.
The Model 1200B series allows ±7.5 V compliance voltage, which ensures the working potential range ±2.4 V for most electrochemical systems. It also uses dual 16-bit DAC and 16-bit ADC for high resolution and accuracy.
The instrument provides many powerful functions, such as file handling, experimental control, graphics, data analysis, and digital simulation. Some of the unique features include macro command, working electrode conditioning, color, legend and font selection, data interpolation, visual baseline correction, data point removal, visual data point modification, signal averaging, Fourier spectrum, and equations relating to electrochemical techniques.
The CHI1200B series provides various instrument models to meet different applications and budgets. The series is available in potentiostat (CHI1200B, 1210B, 1220B, 1232B, and 1240B) and bipotentiostat versions (CHI1202B, 1212B, 1222B, 1232B and 1242B).
Potentiostat / bipotentiostat
Maximum potential range: ±2.4 V
Compliance voltage: ±7.5 V
Current range: ±2 mA
Reference electrode input impedance: 1x1012 ohm
Sensitivity scale: 1x10-9 - 0.001 A/V in 8 ranges
Input bias current: < 100 pA
Current measurement resolution: < 5 pA
Data acquisition: 16 bit @ 10 kHz
CV and LSV scan rate: 0.000001
to 10 V/s
CA and CC pulse width: 0.001 to 1000 s
CA and CC Steps: 1 - 320
DPV and NPV pulse width: 0.001 to 10 s
SWV frequency: 1 to 5000 Hz
Low pass filter for current measurements
Maximum data length: 128K-4096K selectable
Power: USB port
Chassis dimensions: 7” (W) ´ 4.5” (D) ´ 1” (H)